Reduce the risk for aquaplaning

September 1, 2020 0 Comments

Aquaplaning causes numerous accidents during the summers when you have sudden heavy showers. The tyres lose contact with the road surface and aquaplaning is a fact and the driver lose control over the vehicle. To make sure that you are not part of the statistics, you will need to make sure that you take precautionary steps to avoid or limit the occurrence of aquaplaning when you drive.

Aquaplaning will only happen when you have a lot of water on the road surface or when you drive in heavy rain. The heavier the rain is, more water will be present on the road surface. Countries which tend to use studded tyres tend to have more wear and create tyre tracks in the tarmac on the most driven path on the road. This creates a place where the water can amass, and which can then cause the aquaplaning to happen. It can be scary when you change lane and get back to the beaten path, where you can struggle to get tyre to road contact.

Aquaplaning basically happens when the tyre loses contact with the road surface and start plane on the water layer that is created between the tyres and the road. When this happens, you lose control over the vehicle as you can’t steer the vehicle. The tyre will need to push the water to the sides or store it in the tread to prevent this from happening. You have a few factors that will impact this from happening. Tread depth, as big depth creates a larger volume for water storage and being able to channel water to the sides. Speed, as with higher speed the tyre has less time to excavate the water and then the tread design, for how the flow is directed through the tyre.

To prevent aquaplaning from happening you will need to have tyres that have incorporated the latest tyre technologies to prevent aquaplaning. You need to have premium summer tyres or then all-weather tyres for the summer, spring or autumn use for when you have rain. The latest technologies in the tread will improve the flow and use different methods for pushing the water to the sides and storing more water within the tread. Make sure that you check your tyres tread depth and change the tyres for new ones once you reach 4 mm depth.

During wintertime you can experience slusplaning, which is similar, but you have the layer of watery snow that the tyres will need to push away from the road surface. The factors impacting it are the same, but you will need to have winter tyres to cope with it.

Overall, as the quality and conditions of the tyres are involved make sure that you purchase premium tyres with good aquaplaning properties and then reduce your speed while driving in heavy rain or on surfaces with a lot of amassed water. Finally make sure that you regularly check the tyres tread depth to ensure that they are above 4 mm, so that they are safe to drive with.

For more information regarding premium tyres with the latest tyre technology to prevent aquaplaning visit: https://www.nokiantyres.com/

Leave a Reply

Your email address will not be published. Required fields are marked *